As part of the intruder alarm system, the Informa speech dialler dials pre- programmed phone numbers. It then plays recorded voice messages to alert someone. Honeywell 8EPA Informa White Speech Dialler: : Electronics. GSM 2G AUTO DIALER – ADT/VISONIC /HONEYWELL/UTC COMPATIBLE. The Informa is a Speech Dialler for use with intruder alarm systems. The Informa is a keypad unit that uses a telephone line to dial pre-programmed telephone.
|Published (Last):||8 August 2012|
|PDF File Size:||4.80 Mb|
|ePub File Size:||10.95 Mb|
|Price:||Free* [*Free Regsitration Required]|
Download “Speech Dialler Engineering Information”. Automatic call initialisation Operation in the absence of a proceed indication. This connection is unnecessary if Follow Me is not used. In both augodialer, if a Follow Me number has. With this type of panel, the Informa may be used as a single-channel dialler triggered from the bell output. Connect the Informa to the panel. You can change this as follows: May Firmware Update Notice What is the product update?
UK s best selling phone brand. Consult your PABX provider for further details, if required. Payphones The Informa is not suitable for connection as an extension to a payphone or carrier system. Acknowledgement Instructions Contact your Installer details below When you answer a call from an Informa, listen Company: If the control panel used has a ve bell trigger, the Infroma inputs must be programmed as active low trigger.
Honeywell Informa Speech Dialler
The intruder alarm has been activated. The Informa dials the number then plays message 1 followed by message 2. Dallas Delta Corporation Pty. Press  followed by the new four-digit code. This is usually 9. By default, this is This can be changed either by the customer or the engineer, as follows: What Does the Informa Need to Know?
Honeywell Informa Speech Dialler
The Informa automatically resets to the top level of the Engineering autodkaler.
Honeywell tuxedo touch series home automation system 48 pages. Three of these numbers are permanently stored via the Engineer program in the NVM. It will not accept any telephone number starting with or User Manual for Autodialer v5.
The Autodualer is a keypad unit that has the capability.
Message number 1 referred to as a ‘location. Check with the installer which type of setup has. The telephone cable should be routed away from all other cables inside the housing.
After a iforma interval the Informa will replay the selected message.
Security System User Guide Contents 1. Applications The Informa is suitable for connection to the following types of telephone line: After the message is recorded there is a short interval, after which the Informa plays back your recorded message.
Enabling the Follow Me Function. This will allow a location message followed by one of three alarm messages to be sent by the Informa. Message 1 may be up to 11 seconds long; the three alarm messages are 3 seconds long. Before Operating Your Alarm System The four LEDs show the trigger level of autoxialer 1 to 3 and the inhibit input, respectively. Note that it is only possible to acknowledge the call with a tone-dialling telephone. To program any of the three telephone numbers: This indorma length of time is called the message timeout and can be set by the engineer to between 05 and 99 seconds.
Your Informa will return to the factory setting. The NVM will be reset.
Honeywell Informa Operating Instructions
If the code is the same as the engineer code, the Informa will not accept it and sounds a long two-note error tone. If the call is not acknowledged, the Informa will. When the Informa makes a call it will always play back its messages for a fixed length of time before it hangs up and tries another number.
The Follow Me telephone number is entered into the Informa if requiredbefore the system is set.
For complete instructions, see page 11 of the Programming section: How to operate Personal Attack Access unforma Contents Unset system indications – – – – – – – – – – – System indication – – – – – – – – – – – – Access codes – – – – – – – – – – – – – – – – How to operate Personal – autkdialer – – – – How to unset More information.
If two different alarms have occurred, both.